ALL IN ONE "THE ONE" ROUGE NOIR
PRODUCT DESCRIPTION
The third generation gel varnish All in One "THE ONE" is thinly viscous and only suitable for short natural nails.
A UV / LED lamp is required to cure the product.
FEATURES & BENEFITS
• Thin viscosity
• Very covering
• No perspiration layer •
Very good adhesion
• Very good and long-lasting shine
• Removable with Soak-Off Remover
• Lasts up to approx. 3 weeks with normal Stress on the nail
APPLICATION
1. Nail preparation
Push back the cuticle and remove it thoroughly, shorten natural nails and file them into shape, buff the nail plate and free nail end (do not roughen with a file!) And make sure that no fringes remain on the free nail end. Finally, dust the nails properly and degrease them with a dehydrator (not necessary with dry natural nails).
2. Apply color and cure
Apply a thin layer of All in One "THE ONE" in the desired color over the entire surface of the nail and coat the free end of the nail, then cure for 90 seconds under LED / 120 seconds under UV.
If necessary, with different types of natural nails, repeat with a second layer of All in One "THE ONE". Cure 90 sec. Under LED / 120 sec. Under UV.
3.
Care apply nail oil.
Removal of the product:
Carefully roughen the nails with a file until the surface is no longer shiny.
Soak a cellette with Soak Off Remover, place it on the roughened nail and wrap your fingers tightly with aluminum foil.
Let it work for 15 minutes and then carefully
scrape off the detached All in One "THE ONE" with a Pro Pusher or carefully
remove it with a fine file (180 grit or 240 grit) .
When applying the All in One “THE ONE” again, carry out steps 1-3.
Curing time UV: 120 sec.
Curing time LED: 90 sec
Color:red
PRODUCT DESCRIPTION
The third generation gel varnish All in One "THE ONE" is thinly viscous and only suitable for short natural nails.
A UV / LED lamp is required to cure the product.
FEATURES & BENEFITS
• Thin viscosity
• Very covering
• No perspiration layer •
Very good adhesion
• Very good and long-lasting shine
• Removable with Soak-Off Remover
• Lasts up to approx. 3 weeks with normal Stress on the nail
APPLICATION
1. Nail preparation
Push back the cuticle and remove it thoroughly, shorten natural nails and file them into shape, buff the nail plate and free nail end (do not roughen with a file!) And make sure that no fringes remain on the free nail end. Finally, dust the nails properly and degrease them with a dehydrator (not necessary with dry natural nails).
2. Apply color and cure
Apply a thin layer of All in One "THE ONE" in the desired color over the entire surface of the nail and coat the free end of the nail, then cure for 90 seconds under LED / 120 seconds under UV.
If necessary, with different types of natural nails, repeat with a second layer of All in One "THE ONE". Cure 90 sec. Under LED / 120 sec. Under UV.
3.
Care apply nail oil.
Removal of the product:
Carefully roughen the nails with a file until the surface is no longer shiny.
Soak a cellette with Soak Off Remover, place it on the roughened nail and wrap your fingers tightly with aluminum foil.
Let it work for 15 minutes and then carefully
scrape off the detached All in One "THE ONE" with a Pro Pusher or carefully
remove it with a fine file (180 grit or 240 grit) .
When applying the All in One “THE ONE” again, carry out steps 1-3.
Curing time UV: 120 sec.
Curing time LED: 90 sec
Color:red
PRODUCT DESCRIPTION
The third generation gel varnish All in One "THE ONE" is thinly viscous and only suitable for short natural nails.
A UV / LED lamp is required to cure the product.
FEATURES & BENEFITS
• Thin viscosity
• Very covering
• No perspiration layer •
Very good adhesion
• Very good and long-lasting shine
• Removable with Soak-Off Remover
• Lasts up to approx. 3 weeks with normal Stress on the nail
APPLICATION
1. Nail preparation
Push back the cuticle and remove it thoroughly, shorten natural nails and file them into shape, buff the nail plate and free nail end (do not roughen with a file!) And make sure that no fringes remain on the free nail end. Finally, dust the nails properly and degrease them with a dehydrator (not necessary with dry natural nails).
2. Apply color and cure
Apply a thin layer of All in One "THE ONE" in the desired color over the entire surface of the nail and coat the free end of the nail, then cure for 90 seconds under LED / 120 seconds under UV.
If necessary, with different types of natural nails, repeat with a second layer of All in One "THE ONE". Cure 90 sec. Under LED / 120 sec. Under UV.
3.
Care apply nail oil.
Removal of the product:
Carefully roughen the nails with a file until the surface is no longer shiny.
Soak a cellette with Soak Off Remover, place it on the roughened nail and wrap your fingers tightly with aluminum foil.
Let it work for 15 minutes and then carefully
scrape off the detached All in One "THE ONE" with a Pro Pusher or carefully
remove it with a fine file (180 grit or 240 grit) .
When applying the All in One “THE ONE” again, carry out steps 1-3.
Curing time UV: 120 sec.
Curing time LED: 90 sec
Color:red
