CORRECTOR BIT III
CORRECTOR BIT III
PRODUCT DESCRIPTION
The David 4 N2 corrector bit III is made in one piece from carbide with a cross-cut gearing. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. Ideal for product removal (glue, acrylic, gel) under the nails in concave.
FEATURES & BENEFITS
• Carbide cutter
• crosscut gearing
• Product residues below the nails in Concave
• enables accurate and thorough work
• Recommendation: rpm: 5000
USAGE
Always work in concave at the flat angle and work along the C-curve without pressure.
CORRECTOR BIT III
PRODUCT DESCRIPTION
The David 4 N2 corrector bit III is made in one piece from carbide with a cross-cut gearing. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. Ideal for product removal (glue, acrylic, gel) under the nails in concave.
FEATURES & BENEFITS
• Carbide cutter
• crosscut gearing
• Product residues below the nails in Concave
• enables accurate and thorough work
• Recommendation: rpm: 5000
USAGE
Always work in concave at the flat angle and work along the C-curve without pressure.
CORRECTOR BIT III
PRODUCT DESCRIPTION
The David 4 N2 corrector bit III is made in one piece from carbide with a cross-cut gearing. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. Ideal for product removal (glue, acrylic, gel) under the nails in concave.
FEATURES & BENEFITS
• Carbide cutter
• crosscut gearing
• Product residues below the nails in Concave
• enables accurate and thorough work
• Recommendation: rpm: 5000
USAGE
Always work in concave at the flat angle and work along the C-curve without pressure.
