RAPID SPECIAL ALLROUND BIT 5
SPECIAL ALLROUND BIT V
PRODUCT DESCRIPTION
The special allround bit 5 is made in one piece from hard metal with a special cross-cut gearing, which has a finer abrasion and a lower heat development. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. This bit is ideal for Re- and Backfills.
FEATURES & BENEFITS
• Carbide cutter
• Special crosscut gearing
• Compensation for high or uneven sculpted nails
• Ideal for seamless product transition to the natural nail
• also suitable for gentle shortening of sculpted nails
• enables accurate and thorough work
• Suitable for removing gel or acrylic modeling
• Recommendation: rpm: 15000
USE
Always apply at a flat angle and slide over the surface without pressure. Make sure that the more revolutions per minute, the more you have to rotate the bit over the surface.
SPECIAL ALLROUND BIT V
PRODUCT DESCRIPTION
The special allround bit 5 is made in one piece from hard metal with a special cross-cut gearing, which has a finer abrasion and a lower heat development. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. This bit is ideal for Re- and Backfills.
FEATURES & BENEFITS
• Carbide cutter
• Special crosscut gearing
• Compensation for high or uneven sculpted nails
• Ideal for seamless product transition to the natural nail
• also suitable for gentle shortening of sculpted nails
• enables accurate and thorough work
• Suitable for removing gel or acrylic modeling
• Recommendation: rpm: 15000
USE
Always apply at a flat angle and slide over the surface without pressure. Make sure that the more revolutions per minute, the more you have to rotate the bit over the surface.
SPECIAL ALLROUND BIT V
PRODUCT DESCRIPTION
The special allround bit 5 is made in one piece from hard metal with a special cross-cut gearing, which has a finer abrasion and a lower heat development. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. This bit is ideal for Re- and Backfills.
FEATURES & BENEFITS
• Carbide cutter
• Special crosscut gearing
• Compensation for high or uneven sculpted nails
• Ideal for seamless product transition to the natural nail
• also suitable for gentle shortening of sculpted nails
• enables accurate and thorough work
• Suitable for removing gel or acrylic modeling
• Recommendation: rpm: 15000
USE
Always apply at a flat angle and slide over the surface without pressure. Make sure that the more revolutions per minute, the more you have to rotate the bit over the surface.
