Nail Rapid Coarse Bit 4
COARSE BIT IV
PRODUCT DESCRIPTION
The coarse bit IV is made in one piece from tungsten carbide with a cross-cut gearing. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. This bit is ideal for Re- and Backfills of any sculpted nail.
FEATURES & BENEFITS
• Carbide cutter
• crosscut gearing
• Suitable for quick shortening of a sculpted nail
• Compensation for high or uneven sculpted nails
• Ideal for a seamless product transition to the natural
• enables accurate and thorough work
• Suitable for removing gel or acrylic modeling
• Recommendation: rpm: 15000
USAGE
Always apply at a flat angle and slide over the surface without pressure. Make sure that the more revolutions per minute, the more you have to rotate the bit over the surface.
COARSE BIT IV
PRODUCT DESCRIPTION
The coarse bit IV is made in one piece from tungsten carbide with a cross-cut gearing. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. This bit is ideal for Re- and Backfills of any sculpted nail.
FEATURES & BENEFITS
• Carbide cutter
• crosscut gearing
• Suitable for quick shortening of a sculpted nail
• Compensation for high or uneven sculpted nails
• Ideal for a seamless product transition to the natural
• enables accurate and thorough work
• Suitable for removing gel or acrylic modeling
• Recommendation: rpm: 15000
USAGE
Always apply at a flat angle and slide over the surface without pressure. Make sure that the more revolutions per minute, the more you have to rotate the bit over the surface.
COARSE BIT IV
PRODUCT DESCRIPTION
The coarse bit IV is made in one piece from tungsten carbide with a cross-cut gearing. The shaft length has been shortened so that the adjustment and balance in all handpieces can be done optimally and does not sit too far out of the handpiece. This bit is ideal for Re- and Backfills of any sculpted nail.
FEATURES & BENEFITS
• Carbide cutter
• crosscut gearing
• Suitable for quick shortening of a sculpted nail
• Compensation for high or uneven sculpted nails
• Ideal for a seamless product transition to the natural
• enables accurate and thorough work
• Suitable for removing gel or acrylic modeling
• Recommendation: rpm: 15000
USAGE
Always apply at a flat angle and slide over the surface without pressure. Make sure that the more revolutions per minute, the more you have to rotate the bit over the surface.
